Quick Announcement:
Hey Guys -Great News! DiscountQueens is now partnering with Fabulessly Frugal (check them out) -were still in the process of merging sites and sorting the technicalities to make it happen. Here's a few things you might notice:

-Emails will now be sent by Fabulessly Frugal
-Just the same all deal posts will be focused on their site
-Our site will be up until the merge is completed

Thank you for your continued support and patience!

5 DIY Entryway Projects

Untitled

Is your entryway dull and boring?  Well, it definitely needs a makeover!  Try these DIY projects that will make your entryway gorgeous and organized.

1.  Pallet Entryway Bench

PalletEntryBench

YOU WILL NEED:

2 Pallets

3 pieces 1″x6″ cut to 48″ lengths for the top

8 pieces 2″x4″ cut to 18″ lengths for center supports (ripped down the middle of the pallet)

8 pieces 2″x4″ cut to 18″ lengths for side supports

8 pieces 2″x3″ cut to 18″ lengths for bottom side supports

Wheel Casters

Wood Stain and Seal

Screws

Nails

Tape Measure

Circular Saw

Drill

Hammer

Chisel

Paint Brush

MAKE THIS PROJECT!

2.  Simple DIY Entryway Table

project_SimpleDIYTable_Hero

YOU WILL NEED:

3M™ Wood Filler

3M™ Advanced Abrasives

3M™ Wood Adhesive

3M™ Safety Eyewear (3M™ Safety Products)

MAKE THIS PROJECT!

3.  DIY Vintage Spool Wall Hook

spool-hook-diy

YOU WILL NEED:

a vintage spool

a wooden dowel that fits into the hole at the end of the spool (3/8″ diameter)

a double-sided dowel screw (3/16″ diameter)

MAKE THIS PROJECT!

4.  DIY SHOE DISPLAY

diy-shoes1

YOU WILL NEED:

2 tins of spray paint, for good coverage (If you can’t find your colour crush, you can use standard paint but bear in mind that you will have to paint on a primer first.

A bare wall and heels that would make any wall look good

2 x 1m lengths of cornice or picture frame

Picture hooks for attaching the cornice to the wall (if it is heavy, you will need more hooks) or strong double-sided tape if you’re using moulding.

 MAKE THIS PROJECT!

 5.  RUSTIC ENTRY MIRROR

Entry-Mirror-Title--431x590

YOU WILL NEED:

2 X 7 planks of wood…the older the better

Wood Screws

4 X 7 piece of plywood

Mirror (We used antiqued-beveled)

Liquid Nails for glass

Router

 MAKE THIS PROJECT!

 Thanks for reading and please don’t forget to follow us on Facebook, or pin this post and check us out on Pinterest! Don’t forget to link our social accounts in there -Thank you!